Aidmer78-011/12 PTFE Extruded/Molded Rod
Material
PTFE Rod is made from PTFE resin and prepared by Extrusion or Molded. It has the best chemical corrosion resistance and dielectric property. It is not aged and sticky. It can be used at - 180 ℃ to + 260 ℃ under no load. It has the lowest friction coefficient among known solid materials.
Characteristics:
♦ Superior endurance in corrosion
♦ Non-flammable,limited oxygen index is under 90.
♦ Low friction coefficient
♦ Non-viscous, Self-lubricating
♦ Superior endurance in high & low temperature, can be used -200~260℃
♦ High electrical insulation
♦ Atmospheric aging resistance
♦ Low permeability, good gas barrier property
♦ Good physiological compatibility and anti-thrombotic
Physical Properties
|
Item |
Unit |
Standard value |
Test method |
|
Density |
g/cm3 |
2.10～2.30 |
- |
|
Color |
- |
Black |
- |
|
Tensile Strength |
MPa |
≥15.0 |
GB/T 1040.3-2006 |
|
Tensile Elongation |
% |
≥150 |
GB/T 1040.3-2006 |
|
Continuous Use Temperature |
℃ |
-80～260 |
ASTM D4894 |
Size
|
Item |
Diameter (mm) |
Diameter Tolerance (mm) |
Length（Mts） |
|
Aidmer78-011 |
5.0-20 |
±0.5mm |
As Required |
|
25-80 |
±1mm |
||
|
85-200 |
±2mm |
||
|
Aidmer78-012 Molded |
100-400mm |
±1.5~±3mm |
0.3 |
Applications:
♦ Corrosion resistance: widely used in all chemical containers and parts which contacted with corrosive media, such as tanks, reactors, equipment lining, valves, pumps, fittings, filter materials, separation materials and pipe for corrosive fluids.
♦ Abrasion resistance: can be used as a self lubricating bearing, piston rings, seal rings, gaskets, valve seats, sliders and rails etc..
♦ Insulation materials: mainly used in the manufacture of various products with high temperature resistance, high-frequency resistance, electrical insulation and arc resistance, such as high-frequency cables, moisture-resistant cables, capacitor coils, insulating cover for wire, etc..
♦ Non-stick materials: can be used for non-stick coating such as non-stick pan and non-stick roller for food processor.
