Aidmer76-026 Kevlar Packings Lubricant PTFE

 Kevlar Rope packings is made of Du Pont's aramid yarn impregnated with PTFE dispersion and processed with lubricant. braided into square cross section. As the strength and module of Kevlar rope is as high as the steel-like strength. So Kevlar Rope packings compared with other kinds of braided packings. they can resist more serve media and higher pressure...

Aidmer76-026B Kevlar Packings with Silicone Core

Kevlar Packings braided with silicone core is Composite braid, high strength aramid fibers braided around 4 equally spaced silicone silicone rubber cords forming a packings that offers excellent resilience and wear resistance. Aidmer76-026B is Excellent for worn glands and for large equipment with eccentricity and run-out problems..

Aidmer76-026C Kevlar Packings Impregnated PTFE

Kevlar fiber braided packings is made of Du Pont's aramida yarn impregnated with PTFE emulsion, no any lubricant. Aramid Packings was harder than Aidmer76-026, as the strength and module of Kevlar is as high as the steel-like strength. Aramids Packings can be resist more serve media and higher pressure. It can be installed separately or as

Aidmer76-020 Corner PTFE and Kevlar Packings

PTFE and Kevlar braided packings was made of PTFE yarns and the reinforced Aramid of Aramid fiber. This structure, Enhances the lubricability of Aramid and reinforces the strength of the pure PTFE packings. kevlar PTFE Rope is made of synthetic composite, Aramid and reinforces the strength. finished braiding packings...

Aidmer76-020A Corner Acrylic and Kevlar Packings

Acrylic and Kevlar braided packings was pure aramid filament corners interbraided for strength and abrasion resistance combined with Acrylic composite filaments in the seams to produce a high performance chemically resistant packings. Acrylic kevlar packings is recommended for rotary and centrifugal shaft, reciprocating applications, and valve.

Aidmer76-020B Zebra PTFE and Kevlar Packings

PTFE and Kevlar braided packings was made of PTFE yarns and the reinforced Aramid of Aramid fiber. This structure, Enhances the lubricability of Aramid and reinforces the strength of the pure PTFE packings. kevlar PTFE Rope is made of synthetic composite, Aramid and reinforces the strength. finished braiding packings...

Aidmer76-020C Zebra Acrylic and Kevlar Packings

Acrylic and Kevlar braided packings was pure aramid filament corners interbraided for strength and abrasion resistance combined with Acrylic composite filaments in the seams to produce a high performance chemically resistant packing. Acrylic kevlar packings is recommended for rotary and centrifugal shaft, reciprocating applications, and valve.

Aidmer76-027A Corner Graphite Ptfe and Aramid Packing

high tensile strength aramid fiber and graphite impregnated PTFE self-lubricating fibers diagonally positioned and braided to produce a low friction, wear-resistant packings. Graphite PTFE kevlar packings is is recommended for rotary, centrifugal, and reciprocating applications

Aidmer76-027B Zebra Graphite Ptfe and Aramid Packing

high tensile strength aramid fiber and graphite impregnated PTFE self-lubricating fibers diagonally positioned and braided to produce a low friction, wear-resistant packings. Graphite PTFE kevlar packings is is recommended for rotary, centrifugal, and reciprocating applications

Aidmer76-027C Corner Carbonized and Kevlar Packings

Carbon and aramid Packing is made of High-quality special yarn, It was impregnated with PTFE emulsion, with corner of Kevlar fibre braided packings, It has better sliding velocity than combination of PTFE with graphite incorporated yarn with Aramid corner packings. It was processed with high temperature lubricant and impregnated PTFE emulsion.

Aidmer76-027D Zebra Carbonized and Kevlar Packings

Carbon and Kevlar Packings is made of High-quality special yarn, It was impregnated with PTFE emulsion, with corner of Kevlar fibre braided packings, It has better sliding velocity than combination of PTFE with graphite incorporated yarn with Aramid corner packings. It was processed with high temperature lubricant and impregnated PTFE emulsion.